Profile View
Bags are held in an almost horizontal position.
View from underneath
Bottom side of assembly
Top side of assembly
eoGEAR Angled Saddle Bracket — Special Order
eoGEAR Angled Saddle Bracket — Special Order
eoGEAR Angled Saddle Bracket — Special Order

eoGEAR Angled Saddle Bracket — Special Order


This bracket is part of the eoGEAR RandoBag family — a modular bag system for the self-sufficient cyclist or randonneur.

Constructed of tough 420-denier Diamond Ripstop Nylon fabric reinforced with nylon webbing. This model was developed to answer the needs of those on shorter framed bicycles (i.e. 56cm or smaller).

  • Sewn-in is a die-cut HDPE stiffener plate
  • This bracket holds the bags in a horizontal position, providing more clearance than the 2314 Standard Bracket — because of this we do no recommend this bracket when using the 6.8 Zippered Bag as the front pocket will be difficult to access.
  • Also visit Richard’s blog page for the design background of why I created this series of bags.

Saddle & Frame Compatibility

This bracket mounts to the seat rail of most saddles, however some Brooks and Selle An-Atomica require the “#2311 Wide Rail Adapter.” See this page for other exceptions.

To determine which saddle bracket is best for your size bike frame, visit this page. Frames smaller than 56cm may not work with this saddlebag system as the bag may rub on the rear wheel.


Weight: 180 g (6.3 oz.)
Includes: Metal frame for securing to the rails of your saddle (Minoura SBH-80 Single Water Bottle Cage Holder). We also provide an extra pair of (black) allen screws that a tad longer than those provided by Minoura as it makes it easier to install. You may use the supplied (silver) screws as a back-up.
All eoGEAR RandoBags bags will attach to this bracket, except Q680 Zippered RandoBag™ 6.8 sold before April 2012.
Fabric & plastic portion made in USA and the frame made in Japan

eoGEAR SKU #2321-KAN

made in usa