eoGEAR Junk Drawer Aerobar Bag
This Junk Drawer Bag started out as a wide compartmentalized handlebar bag but has now been converted into a “aerobar bag” with the addition of a few more D-rings to the stock model.
- The bag can be mounted two ways:
1) Attach the bag with the main zipper in the “normal” upright position, right between the two bars. The main compartment can be accessed while on the bike. It fits bars with a outside width up to approx. 7 to 10cm / 2.75 to 4".
2) Attach the bag on it’s side with the side pocket zipper facing up and accessible to the rider. The main zipper is accessible from the edge. The bag is more aero this way. With this method, we recommend using one or two dividers to keep the sides of the bag from separating and sagging. It would be better to them right down the center as there is a seam where the pocket is made and then place the other divider (if desired) off center on either side.
- The kit includes:
- Junk Drawer Bag
- One padded divider which can be moved or removed as it uses Velcro (additionals can be purchased as add-ons, SKU # 2452)
- Four short 20mm-wide Silicone-backed Omni-Tape D-Ring straps (Velcro-like on one side only). They are very sticky to keep the bag from sliding down the bars.
- One long compression D-ring compression strap (SKU # 2445-LRG, but not on our site yet as a separate product)
- The bag is constructed of a combination of 420-denier Nylon Diamond Ripstop and Nylon Pack Cloth. It has a water-repellent coating on the inside of the fabric — we don’t use cheap polyester fabrics like some imported bags.
- The main compartment uses heavy-duty #8 water-repellent zipper. The side zipper uses a #5 coil zipper. This zipper is not water-repellant. A 1-liter Nalgene water bottle (or any bike bottle) will fit inside with room to spare.
- There is a hand-grab loop for off-bike use.
- Bikepacking feature: with the bag in the vertical “upright” mode, additional gear can be strapped to either or both sides of the bag using the four D-rings on the front side and by adding four Uniloops to the DTS tabs on the back side.
- The bag has our exclusive eoGEAR DTS (Dual Tab System — two strong Velcro straps that double over each other) which also attach to your handlebars (using the 2351 strap kit) or to your waist belt (up to 2" tall) or to our nylon waist belt.
- The width & shape of this bag works ideally as a waist-mounted fanny pack (select the optional waist belt or attach to your own).
- Will not mount to a saddle.
5.5h x 11.50w x 3.25d" I.D.
Volume = 214 cu in
Weight = 7.6 oz.
14h x 29w
8.5d cm I.D.
Volume = 3.5 lit
Weight = 215 g
eoGEAR SKU # 3440-KIT
Designed and Crafted in the USA