Season's Greetings!
B107 shown. Enlarge to see captioned features. NOTE: the belts no longer have Uniloops sewn onto them.
The inside of the belts use a breathable 3D spacer fabric.
Wearing the buckle in the back frees up valuable real estate at the front of the belt. Read description for more info.
Old style B107 shown. The B106 is 10cm (4") shorter, B108 is 10cm (4") longer, B109 is 20cm (8") longer than the B107 and the B111 is longer yet!
Newer belts have gap in the 1" (25mm) webbing for easier attachment of pouches. Eventually all padded belts will use a 1-½" (40mm) buckle as shown here.
With the Kinesis attachment system, pouches do not slide down the belt when removed.
The optional slider buckle will fix the length of the belt so it doesn’t come out of adjustment when the belt is not worn.
The B516 is to prevent slash & grab of your belt while being worn. INSTRUCTIONS: after attaching the belt on yourself, slip the Velcro strap in between the buckle slots as shown and back onto itself.
Shown is the B113 Medium/Large Belt. Other sizes look similar but are shorter or longer. Newer versions have a 1-½" buckle instead of the 2" shown.
Shown is the B113 Medium/Large Belt. Other sizes look similar but are shorter or longer. Newer versions have a 1-½" buckle instead of the 2" shown.
Shown is the B113 Medium/Large Belt. Other sizes look similar but are shorter or longer. Newer versions have a 1-½" buckle instead of the 2" shown.
Shown is the B113 Medium/Large Belt. Other sizes look similar but are shorter or longer. Newer versions have a 1-½" buckle instead of the 2" shown. B107 shown. Enlarge to see captioned features. NOTE: the belts no longer have Uniloops sewn onto them. The inside of the belts use a breathable 3D spacer fabric. Wearing the buckle in the back frees up valuable real estate at the front of the belt. Read description for more info. Old style B107 shown. The B106 is 10cm (4") shorter, B108 is 10cm (4") longer, B109 is 20cm (8") longer than the B107 and the B111 is longer yet! Newer belts have gap in the 1" (25mm) webbing for easier attachment of pouches. Eventually all padded belts will use a 1-½" (40mm) buckle as shown here. With the Kinesis attachment system, pouches do not slide down the belt when removed. The optional slider buckle will fix the length of the belt so it doesn’t come out of adjustment when the belt is not worn. The B516 is to prevent slash & grab of your belt while being worn. INSTRUCTIONS: after attaching the belt on yourself, slip the Velcro strap in between the buckle slots as shown and back onto itself.
$59.00

Standard-weight “Black Belt”

Our standard padded belt & most popular model.

  • Made from a 6mm (1/4") dense closed-cell foam and is 9cm (3-1/2") high. The foam does not absorb moisture.
  • It is made with a tough dual-adjustable buckle, the same model found on mountaineering backpacks. You can adjust with either left or right hand. 
    Starting in mid 2024, we will be migrating from using a 2" (50mm) buckle to a more lean & mean 1-½" (40mm) buckle instead.
  • Conically cut (curved like a banana), providing a good fit for both women and men.
  • Inside surface of our belt utilizes 3D Spacer fabric, a soft breathable knit fabric. The outer surface is made of 500-denier DuPont Cordura® Plus nylon fabric.
  • Kinesis belts fit over streetwear, including your pants belt.
  • Belts are cut with extra webbing for use over winter apparel.
  • All belts include a pair of Acetal (plastic looking) Strap Keepers which helps keep the loose end of the belt webbing tidy. 

Product Update

Starting in the summer of 2022, we started to manufacture our belts without the vertical “Uniloops” on them, since all current KInesis products do not require it (older products utilized the TwinBuckle system). See this page for photos.

Sizing

Old belt sizing, aka when we offered five belt sizes (B106, B107, B108, B109 & B111): Order the same size as your pants. 

New belt sizing, three belt sizes instead of five (B110, B113 & B117): Take a measurement over your clothing and pants belt. This is usually about 1.5” more than your normal “pants  size.”

Kinesis belts are sized to fit over normal street wear, including a regular pants belt. Since we provide an extra webbing “tail,” the belt will fit a larger waists or can  be used effectively over winter apparel.

Always get the largest belt you can fit into, as it will provide you with more attachment points, however if you are borderline between two sizes, get the smaller size as the belts can go larger, but they cannot cinch down much past the recommended size.

For women — keep in mind the measurements are for your natural waist or narrow point above your hips. This is much higher than where most women wear their pants these days. If you plan to wear your Kinesis belt lower on your waist or hips, measure that area accordingly. (It may mean going up a size.)

Specifications

As stated below for the large: “Optimum fit for 34-38 waist, (fits up to 50"),” means that the padded portion of the belt will wrap around the majority of your waist if you are in the 34 to 38-inch range. Since we provide an extra webbing “tail,” the belt will fit a larger sizes — the padding just won't surround your waist. Also, this long tail enables the belts to be used effectively over winter apparel.

B110 Small – Optimally fits 24–31.5" (62–84cm) & adjusts up to 36" (91cm), based on the measurement over your clothing, including your pants belt. This size has ten narrow attachment slots. The foam padded or fabric portion of the belt is 28" (71cm). Formerly labeled as the B106.

B107 Medium – Optimum fit for 29-33" (74-86cm) waist. Fits up to 46" (117cm) Has 12 attachment slots* or room for six double-wide pouches. The foam padded or fabric portion of the belt is 31.5" (80cm).

B108 Large – Discontinued. Optimum fit for 34-38" (87-99cm) waist. Fits up to 50" (127cm) Has 14 attachment slots* or room for seven single-wide pouches or seven double-wide pouches. The foam padded or fabric portion of the belt is 35" (90cm).

B113 Medium/Large – Optimally fits 31.5–41" (80–104cm) & adjusts up to 48" (1221cm), based on the measurement over your clothing, including your pants belt. This size has 13 narrow attachment slots. The foam padded or fabric portion of the belt is approx. 33" (84cm).

B109 X-Large – Optimum fit for 39-47" (100-122cm) waist. Fits up to 54" (137cm) Has 18 attachment slots* or room for nine double-wide pouches. The foam padded or fabric portion of the belt is 39.75" (101cm).

B111 XX-Large – Optimum fit for 48-54" (123-137cm) waist. Fits up to 64" (162cm) Has 22 attachment slots* or room for 11 double-wide pouches. The foam padded or fabric portion of the belt is 47.7" (121cm).

*See “Modularity is the Key” on this page for explanation of pouch widths. 

Special Notes

Arctic Conditions: Quality buckles are made from either Nylon or acetal (Delrin®). We use a Nylon/Acetal combination for our belts because at normal temperatures it is stronger & more impact resistant than 100% acetal. Nylon, however, may not be suitable for high humidity (white water rafting, kayaking or canoeing) or extreme sub zero (-20ºF or less) temperatures. Special order belts with substitute acetal buckles are available at no additional cost...as of 2024 they only available on the older style 50mm-wide buckles.

HIgh Crime Areas: The B516 is a small Velcro add-on strap to (hopefully) prevent slash & grab of your belt while being worn.

Designed and Crafted in USA

made in usa