The standard width uses a “half pipe” design, whereas the short width is only “third pipe” to allow more clearance on some saddles rails.
Minoura frame and adapter on a SAA saddle.
Standard Saddle Bracket
Close-up detail of the adapter on a Rivet saddle.
INSTALLATION STEP 1: With the plate sitting in the curve of the rails, adjust the head of the outside bolts so they are snug against the inside of the rails.
INSTALLATION STEP 2: The plate should be in the center of the curve or slightly above it.
INSTALLATION STEP 3: Attach the rear plate to the frame and center the frame on the rails.
INSTALLATION STEP 4: Although this aluminum is aircraft-grade, it will flex. Because it is softer than hardened steel, it will stick to the rails of your saddle without reefing on the bolts. It only needs to hold the weight of your bag, NOT your body!
One customer was frustrated by the difficulty in securing his 2311 plate to a Brooks and did his own aftermarket U-bolt arrangement to more securely attach it. Photo: Ren Mortara
One customer was frustrated by the difficulty in securing his 2311 plate to a Brooks and did his own aftermarket U-bolt arrangement to more securely attach it. Photo: Ren Mortara
Another view of a customer's custom "U bolt" attachment with the bracket attached. Photo: Ren Mortara.
This is a dated photo: current versions feature a half-pipe, not a third-pipe, for additional strength.
This is a dated photo: current versions feature a half-pipe, not a third-pipe, for additional strength.
This is a dated photo: current versions feature a half-pipe, not a third-pipe, for additional strength.
This is a dated photo: current versions feature a half-pipe, not a third-pipe, for additional strength. The standard width uses a “half pipe” design, whereas the short width is only “third pipe” to allow more clearance on some saddles rails. Minoura frame and adapter on a SAA saddle. Standard Saddle Bracket Close-up detail of the adapter on a Rivet saddle. INSTALLATION STEP 1: With the plate sitting in the curve of the rails, adjust the head of the outside bolts so they are snug against the inside of the rails. INSTALLATION STEP 2: The plate should be in the center of the curve or slightly above it. INSTALLATION STEP 3: Attach the rear plate to the frame and center the frame on the rails. INSTALLATION STEP 4: Although this aluminum is aircraft-grade, it will flex. Because it is softer than hardened steel, it will stick to the rails of your saddle without reefing on the bolts. It only needs to hold the weight of your bag, NOT your body! One customer was frustrated by the difficulty in securing his 2311 plate to a Brooks and did his own aftermarket U-bolt arrangement to more securely attach it. Photo: Ren Mortara One customer was frustrated by the difficulty in securing his 2311 plate to a Brooks and did his own aftermarket U-bolt arrangement to more securely attach it. Photo: Ren Mortara Another view of a customer's custom "U bolt" attachment with the bracket attached. Photo: Ren Mortara.
$19.95

eoGEAR Wide Rail Adapter (for Brooks, Rivet or similar leather saddles)

Overview

  • This adapter is for attaching any eoGEAR RandoBag which is using an L-bracket, to certain leather saddles which typically have wider rails in the rear.
  • It is also used for attaching the Minoura Double Water Bottle (SBH-300) bracket to these saddles for those wanting to haul extra water bottles.
  • Has two adjustable spacer screws that you can adjust to the rail width for a snug fit.
  • This part replaces the steel back plate provided with the Minoura bracket, which is the backbone for the eoGEAR RandoBags (but not used for eoGEAR “SeatBags”) or those that use the Dual Tab System (DTS).
  • Fit most, but not all saddles. See this page for details (scroll down to “eoGEAR Alloy Bracket...” heading).

User Tip

Be sure you adjust the outer pair of nuts and bolts so they are tight against the inner sides of your saddle rails. This will keep the attachment frame from sliding to the left or right and rotating out, causing a total loss of your bag.

Wide Rail Adapter Instruction Sheet

Also visit out Seat Bag Sizing Chart (scroll down to the bottom) for further information on saddle fits.

Specifications

Weight: 40 g (1.4 oz.), comparable in weight to the OEM Minoura “back plate” it replaces.
Includes custom plate, four screws, four nuts and two spring washers (the two main “long” screws are M5 Socket Head Cap [allen] x 25mm should you wish to carry spares on long, self-supported trips).
Made from aircraft-grade 6061-T651 1/8" aluminum stock.

eoGEAR SKU # 2311

Made in the USA